Common Refrigerator Filter Problems Explained

Changing the water filter of our refrigerator is easy, yet challenging to an extent. After a lot of research done over this, and the result of such research. We have put together  a list of the issues that commonly arise when we replace our refrigerator water filter, and how we can troubleshoot each such issue.

If you don’t change your refrigerator water filter, the dirty filter will not only restricts the water flow but also allows the junk to remain in your drinking water or ice.

Common Installation Mistakes

If the water filter of your refrigerator is not running smoothly, here are some common installation mistakes that you might have made:

1.   Failure to remove the protective cap of your new water filter. Always remember to remove protective caps from your new water filter prior to the installation of it.
2.   I forget to flush the filter. Many fail to flush the filterforfridge before installing the new one, but it should not be forgotten.
3.   The reusable knob of the base grill filter is generally thrown away, but it should not be thrown away as it can be used later.

Ever faced any of these currently listed problems? Now it is time to troubleshoot!

After Replacing the Filter, the Refrigerator Is Not Dispensing Water

The water filter is most likely to not be snapped in all ways if this happens. It could be the water valve leading to the refrigerator if you are still having issues. To check, the old filter must be reinstalled. If the water does not come out of the new filter, but from the old filter, there is no problem with the water valve, but the problem is in the installation of the new filter. There is a problem with the water valve if the water does not come out of the old filter or new filter.

Small Leak or Drip after the Filter Installation

There could be still air in the lines if this happens. Until the water starts to flow freely, press down the dispenser level for two minutes.

Difficulty in Installing or Removing the Filter For Fridge

Sometimes a little extra force is all you need. With removal, sometimes pulling the filter down and out is the problem. The thing that should work is rocking the filter sideways while pulling down. TIP: the top shelf of the refrigerator should be removed from the refrigerator. This is done as it may cause damage due to sudden release. More force shall be applied for installation and also keep turning to lock the position.

Water Tastes Different

As filters for the refrigerator will aim to remove chemicals and contaminants from water and cannot add anything to the taste of water. You are most likely to notice a change of taste in water if the filter you are replacing is quite old, as the water that you drink now is more effective and greater filtered.

Before The Time of Filter to Be Replaced, the Filter Appears To Be Clogged

Your refrigerator water filter may not last for full six months (this is as per industry recommended standards), also depending on water quality and usage. Your filter could be clogged and will probably require replacement if the water flow starts to slow down. A water test must be conducted to determine exactly what is wrong if there is a sudden drop in water quality.  This is because it could be caused by several other factors or situations. This can be done by you also. You may even ask your municipal water source supplier for that information.

Check out the official website of filterforfridge to know more about these products and get assured services. The company has been around for years, and has a great satisfied client range.